Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.

Absorption granules that absorb virtually all aqueous and non-aqueous chemicals. Trivorex not only neutralises acids and bases but a lso oxidants, reductants, etc.

Fall-prevention device, 6 metre webbing strap, with integrated shock absorber. Plastic casing. Almost immediately stops any vertical drop motion. Rotatable hook ensures strap does not twist. Serves as connection between anchor point and harness. Only for vertical use.

Braces as spare spart for motor unit Versaflo. No PPE.

Air hood with PC/polyester safety helmet with hinged visor and Cordura full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 500 with Versaflo or Jupiter, 200 with compressed air.

Pulley with carabiner to attach to tripod for cable of winch or fall arrest block.

Adapter to mount Rebel fall-block on leg of tripod AM100.

Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.

Multicharger for 4 batteries, high capacity, as accessory for motor unit Versaflo. No PPE.

ADX 1200ml Purell Advanced hydrating desinfection gel. Authorisation number Belgium : NOTIF778 Authorisation number Netherlands : 14329 Authorisation number France: 31328 Use biocides safely. Always read the label and product information before use

The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use.

1200 ml refills for Purell TFX Foam dispenser. Foam: 2000 washings. Authorisation number Belgium : BE-REG-00965 Authorisation number France: 38727 Use biocides safely. Always read the label and product information before use

ADX 700ml Purell Advanced hydrating desinfection gel. Compatible with latex or nitrile gloves. Authorisation number Belgium : NOTIF778 Authorisation number Netherlands : 14329 Authorisation number France: 31328 Use biocides safely. Always read the label and product information before use

Rebel fall-prevention device with 15 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from the fall-protection mode to the rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.

Super lightweight sportive spectacles (37g) in clear polycarbonate. Protective covering thanks to flat base curve. Lens inclination of 11° ensures good view downwards and provides the wearer safeness from stumble-accidents. Flexible frame with soft temples(XCT). With Supravision Clean coating coating: extremely scratch resistant, chemical resistant and easy to clean.

Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with 2 Skalt Comita aluminium hooks with 20 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.

Gas tight suit made of very resistant material for disposable suits. This gas tight suit includes socks and straight legs that can be pulled over boots. This suit has fixed Kemblok gloves. The suit is designed to beworn over the compressed air equipment. Suitable for work in ATEX environments only in combination with Hazmax ESD boots. Sizes: S - XXL.

The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.

P2 dust filter from 3M for direct connection to 3M half and full face masks. Protects against harmful dust, mist and smoke particles .

P2 dust filter from 3M for direct connection to 3M half and full-face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter!

Comfortable air hood made of neoprene with a panoramic PVC visor. The required air flow from the compressed air line is between 220 and 280 l/m. An audible alarm signal warns of a loss of pressure. The hood is supported on the shoulders so the head can move freely . Available in: yellow. Sizes: universal.

Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51 cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. Absorption capacity: 16 litres.

Model mounted eye and face wash features the medically acclaimed AXION MSR eyewash and eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain.

High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.

Backpack to carry the motor unit Versaflo TR-300, TR-600 and TR-800 comfortly on the back. Easy to clean and adjust.

Lightweight breathing hood made of WEB 24 with PE visor. Hood with neck and shoulder protection. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. With internal knit collar under the hood for better sealing. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.

Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.

Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.

Rebel fall-prevention device with 15 metre stainless steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from fall-protection mode to rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.

Absorbent pads measuring 7.6 cm x 366 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. The great flexibility of the socks allows them to be easily placed around machines. Absorption

Fire-safe storage cabinet for storage of hazardous substances. Outside has a powder coat finish. The inside has a plastic finish that is resistant to light chemicals. The two doors are self-closing and have an air spring that allows easy opening. The cabinet contains three 33 litre shelf trays and one 55 litre bottom tray. There are inlet and outlet openings at the top of the cabinet (fan available as option). The cabinet has a 90 minute fire rating. Available in: grey. Dimensions: W 1200 x D 615 x H 1968 mm. Weight 420 kg. Delivery to location of use possible on request.

Easy lock® Pre-assembled filters EN4387:2004 + A1:2008 Pre-assembled A2P3 R filter which uses Easy Lock® system to connect to face-piece with 1 click, without adapter. All Moldex products and packaging are 100% PVC-free.

P filter for TR-600/TR-800 motor unit. Protects against highly toxic dust, mist, smoke particles and irritating odours. Clogging of filter only be detected through an increase in the (breathing) resistance, motor unit will then sound an alarm.

Air hood in the form of safety hood with PC visor. Air channel leads to the visor to prevent it from fogging. Can be used in combination with the Sundstörm motorunits SR500/SR700. Visor easy to fold up and air hose is replaceble. For work with a risk of mechanical impact. Weight: 700 g. NPF: 500.

Comfortable half mask in TPE with replaceable ABEK1P3filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivates, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.

AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.

Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these pillows as chemical waste. Absor bent pillows for regular leaks in the same place. Absorption capacity: 105 litres.

Anti-static absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 piece s. These pads are made of 1-ply melt-spun polypropylene with 2-ply spun non-woven fabric for extra tear resistance. Can be used for cleaning parts. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacit y: 84 litres.

HAZWIK® Pillows feature a green spunbond outer covering (to indicate their use with hazardous materials) filled with green polypropylene. For use with chemical and hazardous fluids. Dimensions: 23x23cm.

Belt, decontaminable, as spare spart for motor unit Versaflo. No PPE.

Eye-catching, signal red galvanised 52L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. Waste bin has self-closing lid that is operated with a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.

Emergency shower for spray on contaminated body parts, manual operation, fixed or mobile set up. High pressure polyethylene container, propellant. Handy emergency shower 5 litres, can be installed or mobile (in carriage), within easy reach at the workplace, filled with neutralising liquid HEXAFLUORINE®, suitable for chemical splashes, atomized liquid for perfect dispersal, 2 years of storage time and maintenance free, single-use, no contact between propellant and liquid, refillable.

The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

Intrinsically safe (Ex-proof) battery for SR 500 EX motor unit.

P3 RD with actif carbon Elipse replacement filter for usage on Elipse Integra odour masks. Pack of 10 paires..

Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK2P3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists.

The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

AE1HGP3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C ,sulfur dioxide and hydrogen chloride, mercury and toxic dust, vapour and smoke particles.

Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.

Disposable overpressure suit for connection to compressed air net. Equipped with large visor for a wide field of vision. Panic strip ensures that it can be removed extremely quickly. Equipped with CEJN series 341 coupling. Suit made of blue lamination with fixed gloves Kemblok.

The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.

Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.

Comfortable half mask in TPE with integrated and replaceable particle filters. for anti-odour protection against nuisance odour, dust, all types of fumes, oil and water mists and micro-organismes. Light weight, silicone and latex free. Sizes: S/M and M/L.

Comfortable half mask in TPE with replaceable A2P3filters . Sizes: S/M and M/L.

High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.

Equipped with 2 textile rescue loops on top of the shoulder straps. Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.

1200 ml Purell Advanced hygienic hand rub refills for Purell TFX dispenser. Gel: 1000 washings. Authorisation number Belgium : NOTIF778 Authorisation number Netherlands : 14329 Authorisation number France: 31328 Use biocides safely. Always read the label and product information before use

Lightweight breathing hood made of WEB 24 with PE visor. Hood with double neck and shoulder protection so the inner hood can be tucked inside the clothing. Designed with innovative air guide that allows air to blow through 2 or 3 openings. Air channel leads to the visor to prevent it from fogging. Hood can be replaced separately. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 310 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air.

Eye-catching, signal red galvanised 34L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. The waste container has a self-closing lid operated by a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.

Adapter for mounting sealed block on davit arm.

Winch for descents or rescue. To be used in combination with AM100 tripod. Galvanised cable. Best used in combination with suspension harness. To be used in confined spaces.

White/transparant safety goggles with adjustable silicone headband. With clear polycarbonate lenses covered with an antifog and supravision CR coating. Offers an excellent panoramic field of view. Band contains silicone. This CR model has been manufactured for repeated autoclavable sterilisation (up to 10 times). Perfect for use in clinics, laboratory, cleanrooms and food manufacturing.

3M™ Versaflo™ BT-63 Length Adjusting Breathing Tube is designed to be used with 3M™ Full Facepiece Respirators 7907 S Series, 6000 Series, and half face masks 7500 Series and the 3M™ Versaflo™ Powered Air Purifying Respirator TR-600 and TR-800.

Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK CO P filter for protection agiainst CO and from vapours and mists that may originate in case of fire, dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists. Suitable for use in ATEX environments.